Ask Able to Review Your Laundry Plan
We’ll review your suggested equipment and reply within 24 hours to discuss your requirements, then confirm or adjust the recommendation.
Work out what your laundry needs, explore suitable washing machines and dryers, and plan how they could fit into your room.
Use Able’s commercial laundry planner to estimate capacity, arrange your equipment and see your layout in 3D. Save your plan as a PDF or ask our team to review your requirements and confirm the recommendation.
Estimate equipment needs, explore a room layout and send your plan to Able. You don’t need model numbers or every technical answer to get started.
That’s fine. We’ll prepare a requirements summary for Able rather than guessing machine sizes.
Add each machine size you’re keeping. We’ll estimate its daily throughput using your operating hours, average loading and cycle-time assumptions, then calculate any extra capacity needed.
These are editable starting assumptions, not guaranteed programme times. We include 20% additional workload for planning headroom.
Bring these machines into a scaled room plan. Add doors, windows and furniture, then arrange everything to suit your space.
Enter your room details, then choose Include or Exclude for each feature and furniture item. We’ll build your starting layout. You can drag and adjust items afterwards.
Imagine standing in the main doorway, looking into the room. The wall opposite is the far wall; the others are the left wall, right wall and door wall. We show the main doorway at the bottom of the plan, initially centred. Drag it along that wall afterwards.
Include what is already there or needs space in your plan; exclude anything you don’t need to show. For included items, choose a wall as seen from the main doorway. Approximate sizes are fine—you can drag items into position later.
Include what needs space in your plan; exclude anything you don’t need. Details appear only for included items. Adjust the suggested sizes to suit.
Grab any machine, furniture item, window or service point on the floor plan and drag it into position. Windows, services and additional doors snap to the room edges. The main entrance moves along the door wall. Select a machine to rotate it.
The starting positions are illustrative. You don’t need to get positions right during setup—adjust them here. The 3D view updates as you arrange the floor plan.
Explore the same layout from a doorway or above. Edit the floor plan below to change equipment positions.
Illustrative 3D view—not an installation drawing. UniMac BIM geometry is used as a representative stand-in until the exact manufacturers’ models arrive. It is scaled to each recommended machine’s own dimensions; it does not establish service clearances or connection positions. Verified preferred-brand machines use published heights; other machine heights start at an estimated 1.5m, furniture at 0.9m. The room setup supplies ceiling height. Adjust an item’s height in the floor-plan editor below. Door heights (2.05m), window heights and service-point heights are illustrative. Representative BIM shapes and any product photos are visual references, not exact product replicas. Where imagery is unavailable, illustrated fronts are used. Exact appearance, clearances and access need Able’s review.
Blue: suggested washer · Purple: suggested dryer · Grey: retained machine · Green: furniture. Each machine is named; the dark FRONT marker shows its loading side. Select an item, then choose Rotate Item 90° to turn it. Drag machines and furniture anywhere in the room. Drag windows, services and additional doors around the room edges; they snap to the nearest wall. The main entrance stays on the door wall to keep directions consistent. Arrow keys move the selection by 0.1m; Shift uses 0.01m. Door opening widths are scaled; shaded door areas are indicative, not exact door swings.
Use the item’s unrotated width/depth. Position is the upper-left corner of its current footprint. Measured dimensions are needed for retained machines.
Drag this feature to any room edge to change walls. Use the measurements above for precise placement.
New features start on the far wall. Drag them to any room edge; they snap to the nearest wall. Distances run left-to-right on the far/door walls, and from the far wall towards the door on side walls. Door areas are square planning envelopes extending into the room, not verified swing geometry.
Footprints are a starting point. Service clearances, access routes, machine-door openings, floor loading, hygiene zoning and utility connections still need Able’s assessment. Able will confirm the final installation requirements.
Your requirements, equipment suggestions and any room layout are ready to discuss. Able will check the details with you and confirm or revise the recommendation.
Save as PDF includes your written plan, floor plan and both 3D views when you have created a room layout. Choose Save as PDF in the browser’s print options.
We’ll review your suggested equipment and reply within 24 hours to discuss your requirements, then confirm or adjust the recommendation.
Your details will be used to respond to your enquiry. Privacy policy.
Planner loading. If unavailable, call Able on 01953 885661.
Ask Able to Review Your Laundry Plan
We’ll review your suggested equipment and reply within 24 hours to discuss your requirements, then confirm or adjust the recommendation.